Category: Daily Goody

Zoom.us is a very handy tool for online meetings. In fact I use it for my Podcast Engineering School classes.

But for recording podcast interviews online it may not be the best tool available for the job. It only records at 32 kHz sample rate, which means it only captures frequencies up to 16 kHz. And the audio codec they use does a fair bit of damage to the audio quality since they have to compress the audio a lot in order to make real time communication happen.

Services like Zencastr and Squadcast, which were created specifically for podcast recording, are superior in audio quality. Their main advantage is they record everyone’s audio locally and then upload that audio. This method allows everyone’s audio to be recorded at much higher resolution with much better codecs.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

This is a very good DAW for podcast production for so many reasons. In fact it’s the only DAW I know that was created specifically for radio and podcast production.

For more info on Hindenburg, check out:

• Hindenburg’s website
• My interview with Nick Dunkerley, Creative Director and Co-Creator of Hindenburg
• Tutorial videos made by Bryan Entzminger at Top Tier Audio

Try it free for 30 days 😉

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Be careful when having food and drinks in your studio.

Of course you want to avoid:

• Spilling a drink on any gear
• Having food on your fingertips and then touching your gear

I rarely eat anything near my studio gear, but I almost always have a drink off to the side at a safe distance away from any gear.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Whenever you upgrade any of your audio gear, inevitably you have to decide if you should sell your old gear, or give it away, or keep it.

Personally I tend to keep everything for two general reasons:

1. Someday that previously-used piece of gear may come in handy. This seems logical, however this is rare.
2. I’m not experienced with selling used gear. I don’t know where to sell it, what the terms should be, what to do if the buyer complains of accuses me of the gear being non-functional, etc.

Of course, I’m in the unusual situation where, because I teach podcast production, I may want to use or demonstrate various gear for educational or marketing reasons in the future.

But soon I will have to overcome these two reasons and sell some stuff, though. Because I believe there is a point for each of us when you simply have way too much gear sitting around not being used, and will probably never be used.

What is your philosophy regarding selling your old gear?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Frequency = cycles per second. Meaning, how many times a sound wave completes one full cycle in one second.

Frequency is the property of sound that most determines pitch.

The unit of audio frequency is the hertz (Hz).

The generally accepted standard range of audible frequencies for humans is 20 to 20,000 Hz.

*If you’d like to hear what some different frequencies sound like, check out our episode 100 starting at 20 min. and 37 seconds in, where I demonstrate lots of frequencies.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Graduates of Podcast Engineering School are in the top 1% of podcast engineers in the world in terms of audio production knowledge, strategy and tactics.

As each graduate works and practices, they quickly hone their audio skills and their critical listening capabilities.

Being an elite professional opens up many opportunities in business and life.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Obviously one of the great advantages of being your own boss is choosing your own hours.

In addition to the convenience, it’s also helpful to clarify what hours you will work in order to focus your efforts during those times and then NOT work outside of those times. That’s how you can have a life 😉

Of course sometimes the world (clients, family, circumstances, etc.) will require you to work outside of your normal hours, but those instances are rare.

The idea is: Design your workdays and hours, and then outside of those times live the rest of your life fully. Don’t get sucked into the trap of working everyday all the time.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

The cool thing about this module, besides sounding really good and gluing your mix together really well, is that it’s right inside Ozone 8 where you’ll probably also be using the multiband compressor, limiter, multiband exciter, EQ and more.

Tape saturation can really warm up and smoothen out your entire mix, and this module has good options and controls.

And BTW, the reason many companies are making plugins that model actual tape saturation from the days of analog tape is because analog tape sounds better than digital in many ways!

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Lots of times on podcasts, participants will make random distracting noises like moving their chair, throwing something down onto their desk, smacking the spacebar on their keyboard, clicking a pen, moving their microphone, and about a zillion other things.

If they make these noises WHILE they are speaking, there’s not much you can do, although with iZotope RX7 you can sometimes do a bit of magic (but that takes a lot of time!).

If they make these noises when they are NOT speaking, then it’s possible to edit out them out, and removing those noises really does make a big difference in terms of listening experience for the listeners.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

This plugin automatically boosts and cuts the level of a track to target a level that you specify. This is really handy for automatically boosting the parts of someone’s track when they start mumbling under their breath and become way too quiet, as well as automatically reducing the volume when someone laughs or yells way too loud, etc.

I use this plugin on almost every voice on every podcast episode I produce.

And it frequently goes on sale for $29 so keep a lookout 😉

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

When recording ANY audio, you should keep your headphone volume as low as possible to avoid feedback into your microphone.

Some people like to keep their headphones really loud so they can hear everything really well, but this is not a good practice when recording.

Of course during soundcheck you can crank up the volume to hear things more clearly, but before you start recording bring down the level of your headphones.

I keep my headphones at a very low volume when recording. It’s something you can easily get used to.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

If your guest is wearing a traditional headset (which sits on their head like headphones and has a microphone on a little boom arm coming off one ear) there are a couple things to be aware of.

When sound checking them, make sure that their nose breath doesn’t overwhelm the mic with breath noise. Have them breath out of their nose and if you hear nasty wind noise on the mic then have them move the mic up or down about 1 inch, then test it again until you don’t hear that nose wind noise.

Once the microphone is positioned properly you have to tell your guest to NOT touch or move the microphone AT ALL. Don’t touch it, don’t move it. Because if they do, the mic will make noises which will be difficult to remove later, and in addition the new, different placement of the mic will sound very different than it did before they moved it, and it will take some effort in post-production to match the various levels and tones, etc.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

This is a free plugin, though you’ll have to download the Softube Central app to install and register the plugin.

It’s a modeled output distortion that can be used to warm up vocals and lots more.

The controls are very simple and few, so you won’t have to tweak 47 settings.

If you want to experiment with saturation on your podcast voices, this is a free way to do that.

Let me know how you make out 😉

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

There are a few things you can do to keep your studio and equipment free from dust accumulation.

1. Cover exposed equipment (when not using them) with some sort of cloth, sheets, plastic, etc.
2. Use Swiffer (I use these by hand, and they also make tradition dusters) or something similar to manually remove dust from time to time. They magnetically attract dust so they do a really good job.

How do you protect your gear?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Phantom Power is DC electric power transmitted through microphone cables to operate microphones that contain active electronic circuitry. It is best known as a convenient power source for condenser microphones, though many active direct boxes also use it.

Phantom power supplies are often built into mixers, channel strips, microphone preamplifiers, etc. In addition to powering the circuitry of a microphone, traditional condenser microphones also use phantom power for polarizing the microphone’s transducer element.

A condenser microphone requires phantom power to produce a DC polarizing voltage and to power an internal amplifier required to drive long cables.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

One great benefit of learning how to produce good audio is that any videos you produce will have really good audio, which is SOOOO important.

When it comes to video…

“Sound is half the picture.” ~George Lucas

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Starting a relationship with a new client is a wonderful experience. However, if you don’t onboard them properly you will sow seeds of problems that will appear later on down the road.

Here are a couple thoughts regarding onboarding new clients:

• Be clear on the scope of work. What EXACTLY will you be doing for the client, and what SPECIFICALLY will you NOT be doing for them.
• If you’re managing the launch of their show, be very clear on what information and assets you need from them, as well as how long it will take for the trailer or episode 1 to be publicly available.
• Website integration: Be clear on how they are going to post their episodes on their own website so you can either advise them on best practices and/or provide them with player embed code, etc.
• Turnaround time: How quickly can they expect you to produce an episode after receiving the audio files?
• Length of the agreement/contract: How many episodes over how long a period of time? Payment terms?

NOTE: This is not an exhaustive list of on-boarding considerations.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I use an ever-changing combination of Fabfilter Pro-MB (amazing multiband compressor), iZotope Ozone 8 (multiband compression, limiter, exciter) and iZotope RX7 (to set the final LUFS level and roll-off below ~35 Hz).

What software and/or services do you use? Auphonic? Adobe Match Loudness? FGX Mastering Processor?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I currently use TwistedWave for my detail editing, and unfortunately it doesn’t provide variable playback speed – I’m stuck at regular playback speed, which is a bit of a bummer. Previously I used Soundforge Pro on my PC and I would usually edit at 1.7x speed.

Chris Webster: “I use Audition and I’m at about 1.5x for pretty detailed editing and audio mastering.”

Britany Felix: “Another vote for 2x editing here. Depending on the quality of the audio and how well the host/guest speaks I’m at 1.5/2:1 for most episodes and I definitely don’t skimp on the editing. I remove/correct a lot of things other editors don’t even notice or think about.”

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.