Category: Daily Goody

Compressor: General leveling of louder parts and quiet parts.

Limiting: Chopping off (squashing down, really) those transients that pierce through loudly.

What do you think of this over-simplification?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

When I record audio on my smartphone I always love to use Auphonic Edit: Audio Editor and Recorder for Android. (The iOS app is called Auphonic Recorder)

I use it to capture uncompressed audio which I then upload to a cloud folder of mine so I can download it onto my computer for processing, etc.

I’m sure that there’s a lot more functionality built into the app but I have never delved too deeply into all its features including non-destructive editing and integration with Auphonic Web Service, etc.

Have you tried this app?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

When guests connect online to record a podcast episode, it’s best if they close all the applications on their computer which they don’t need open.

If a guest is connecting with the host via Squadcast, for instance, they obviously need Chrome open to run Squadcast. And if they have notes they want to refer to on their screen that’s fine too. But other than that, guests should close all other applications.

Because, the more applications that are running on any given computer can contribute to possible problems like glitching on the audio recording, computer completely freezing up, files syncing to the cloud taking up valuable bandwidth, etc.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Michael Jerry of Miti Productions discovered this recently — Reaper can record to two different drives simultaneously. If you’re the type to record directly into your DAW, you’ve instantly got a backup of your recording without needing anything more than a jump drive.

Here are two videos on this topic: ONE, TWO

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

What are some good USB hubs for connecting various devices?

Here’s a nice article:

The Best USB Hubs on Amazon, According to Hyperenthusiastic Reviewers

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

The iRig Pro Duo I/O is a portable audio interface. It has two XLR inputs and phantom power. It’s compatible with iPhone, iPad, Android, and Mac/PC, with Lightning, USB-C and USB-A cables included for easy plug-in and play setup.

Also, here’s a nice article by Allan Tépper covering this piece of gear.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Here’s a good technical definition of Amplitude from Sweetwater: https://www.sweetwater.com/insync/amplitude/

Amplitude alone does not singly determine power (or loudness in audio), but does affect it.

Amplitude is also the origin of the word amplifier, a device which increases the amplitude of a waveform.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

When it comes to efficiency and success in business, a wise man (the incomparable Joshua Wade) once taught me these three words:

People. Process. Tools.

And he stressed that THAT’S the order of their importance in business.

So, you may want to keep this short list in mind when growing your podcast editing/production business.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Here’s a nice article on editing dialogue in iZotope RX 7.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Normally I use de-reverb on the entire frequency spectrum of sounds, but I recently had a case where there was a lot of room reverb in the low and low-mid frequencies, so I tried removing reverb in those frequency areas ONLY, and it ended up sounding very good.

The main reason it ended up sounding good in this particular case was because I maintained the midrange and high-end clarity, while removing some muddiness in the low end.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I just learned about the Phantom Blocker from die-hard Podcast Engineering Show listener Michael Merlino. It’s made by Triton Audio, the same company that makes the Fethead.

Phantom Blocker blocks phantom power while leaving the audio signal intact. Phantom power can be applied to either the male or the female side of Phantom Blocker’s XLR connector and will not reach the opposing XLR connector, the audio signal travels without restriction in both directions.

*It’s very handy when plugging in a combination of condenser and dynamic microphones into an audio interface that by default sends phantom power to ALL inputs simultaneously regardless of which inputs need phantom power or not. Using the Phantom Blocker will avoid any potential damage to dynamic microphones caused by unnecessary phantom power.

Here’s the insightful note I received from Michael Merlino:

I wanted to quickly let you know what happened with my 3 mic blow out (1 Q2U and 2 ATR2100s). Learning a ton from your show but still a newbie. But what happened to me could pretty much happen to anyone and I found a solution if needed in the future to prevent it from happening again.

This may be a good daily goodie for ya so here’s quickly what happened. Had this confirmed via Focusrite USA tech support today.

So before I started messing with mics, I did not readily know that condenser mics DO NOT need phantom power as you know. I think what happened is that when I was testing each mic I had phantom power turned.

The issue with the 2i2 is that when you turn phantom on it sends it to both XLR connections. So if the only mic connected is dynamic mic or 1 of the 2 is dynamic, you can easily blast the mic with more power than it can handle and pretty much fry it. I could have done something else in the chain but I doubt it. I think the 3 mics I blew happened because I had the phantom power button turned on..

I did find out that this phantom power mistake must be an issue because triton audio has a product it its fethead line called “Phantom blocker” It sells for $45 and connects to either end of your XLR cable to prevent a charge of phantom power from reaching a dynamic mic. It protects the mic but still allows a clean signal from the mic to the 2i2 or any other audio
interface.

Anyway, figured it out after talking to focusrite tech support today and reasoning thru it.

Moral of the story. When you have an interface that sends phantom to all XLR connections on the unit NEVER use phantom power. I don’t think this is an issue with larger Focusrite units because you can send phantom to one bank of 4 XLRs for condensers and the other bank remains phantom free to use with dynamic mics or other inputs.

It would help if there was a phantom button off and on for each XLR connection but for a low end interface like the 2i2 for $169 bucks I doubt they will mess with that.

Thanks Michael!

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

To help speed up sound check and avoid technical issues in advance, I now ask my clients guests to fill out a short multiple choice questionnaire asking them about their setup in terms of microphone, computer, WiFi strength, headphones, recording space, etc.

Usually I receive their answers several days in advance of their interview, so if there are any glaring issues I will contact the guests for clarification or to make suggestions.

This process helps ensure that there will be no major technical issues when they show up for the actual recording session.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Interesting bundle from Waves — the Waves Content Creator Audio Toolkit.

Details from Waves:

Bring superior sound quality to your podcasts, videos and live streams. Use the industry’s best pro-level tools to solve common audio problems (background noise, lifeless voiceovers, uneven levels) quickly and easily, and meet the loudness standards of all major content platforms.

Poor audio quality is a major reason viewers and listeners abandon videos, podcasts and live streams. Don’t treat audio as an afterthought – improve the audio quality of your content with the most popular tools in the industry.

Included with the Waves Content Creator Audio Toolkit:

1. NS1 Automatic Noise Suppressor for removing distracting background noise
2. Greg Wells VoiceCentric, an intuitive, hugely effective tool that combines EQ, compression, and de-essing into one smart control, to dramatically improve the quality of voice recordings
3. The BRAND NEW Playlist Rider for automatically smoothing out the levels of multiple audio sources (host, guest, music, etc.) in the same podcast, live stream or video
4. WLM Plus Loudness Meter to deliver the right loudness levels for YouTube, Spotify, Apple Podcasts and other major platforms

Features of the Waves Content Creator Audio Toolkit:

• In literally seconds, you can achieve a superior audio quality that will drive more engagement for your content – courtesy of Waves’ industry-standard plugins, used in major recording and post-production studios all over the globe.
• Bring superior audio quality to your podcasts, videos, and live streams
• 4 easy-to-use pro-level tools for instant results
• Compatible with major audio and video editing software
• Remove background noise easily & efficiently
• Boost & brighten dull voice recordings
• Smooth out the levels of multiple sources (host, guests, music) automatically
• Meet the loudness standards of major content platforms
• Includes presets for voice & music-under-voice
• Includes loudness presets for Spotify, YouTube, Apple Podcasts, Apple Music

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

When I record episodes for my show, The Podcast Engineering Show, I play my theme music and all sound clips on my iPad during the recording process. And of course I record that audio on its own track.

FYI, the RØDECaster Pro has this functionality built in — you can load sound clips into it and trigger the audio by pressing the colored pads.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

The Shure BETA 87A is a handheld supercardioid condenser microphone that delivers very good clarity.

The price is around $249.

Note: Corey Coates uses one. Check out his appearance on my show, episode 72.

Have you tried this mic? If so, what was your experience?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Preparation that reduces post-production times:

(remember the Boy Scout Motto? “Be Prepared!” And keep in mind – you don’t have to implement each and every one of these suggestions – use whatever makes sense for you and your show)

• Make sure your equipment is set up properly (mic, interface, etc.)
• Make sure your computer has been restarted and working properly
• Do the show as if it’s Live in one uninterrupted session (instead of stopping, starting again or taking breaks, because this will cause MUCH more editing later)
• Play intro music and sound clips Live (from a tablet or RØDECaster Pro, etc.)
• Use good mic technique
• Keep your energy up
• Research your guest a bit and list possible questions and talking points
• Gather all relevant links and notes, etc.

What else?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Watch me record, mix, edit and publish one of my Podcast Engineering Show episodes (#183). And I also show and tell about my two newest plugins – the Focusrite SC channel strip from Brainworx, and the Oxford Inflator v3 from Sonnox.

Enjoy:

And if you have any questions please let me know.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Descript is able to import and transcribe Zoom & Loom recordings. (and then, of course, edit and export)

Here’s a short post about how to do that.

FYI, personally I haven’t tried Descript yet, but I want to because lots of people are saying good things about Descript.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I recently recorded a special episode for a client where the guest presenter was speaking Spanish. Normally the show is in English.

Personally, I know a bit of Spanish but not enough to understand every word. Therefor, I had to inform my client that I will need someone to provide exact timestamps of content edits because I don’t speak the language.

Of course, there were times when the presenter messed up, then stopped, then let me know (in English, as I had previously instructed him to do) that he was going to start over from a bit earlier. In these cases I was able to make the edits by myself very easily.

One tangential observation: In the mixing phase of a foreign language episode, perhaps it’s a bit easier for beginners to discern sibilance, plosives, various frequency ranges, etc. because their mind will not be “distracted” by comprehending familiar words and understanding the overall message???

Anyhoo- just a thought. What do you think?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.