Category: Daily Goody

The Hooke Lav should be available in April of 2021 and its Kickstarter campaign is going strong right now.

The great Allan Tépper, in his recent article, stated:

“…48 kHz audio sampling. Beyond that, it uses 24-bit resolution (ideal in production, even if you later distribute in a lower resolution) and zero latency to avoid lip-sync issues. Hooke Lav also records locally just in case.”

I actually supported this Kickstarter campaign so I will receive a Hooke Lav in April 2021 (hopefully)!

The thing I like most about it: It records onboard at 24 bit, 48 kHz (and has 8GB onboard storage).

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

The Zoom PodTrak P8 is essentially Zoom’s answer to the RØDECaster Pro.

From the great Daniel J. Lewis of Podcasters’ Society: The Zoom PodTrak P8 “has several things the RØDECaster Pro doesn’t have, like a de-esser, built-in editing, more inputs and headphone outputs, and AA-battery powering. It outputs to USB only as stereo, but records in multitrack.”

And I’m sure that the RØDECaster Pro has features that the PodTrak P8 does not have, but I don’t own either so I haven’t looked into it that far.

Are you psyched about this new piece of gear? Have you looked into it? Are you going to get one?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Someone recently asked me for advice for speaking into a lavalier microphone.

My simple, practical reply:

“Clip it to yourself as close to your mouth as possible, and make sure it doesn’t rub against your clothing causing nasty scratching sounds which you will not be able to remove later. Also, if the mic has a directional pickup pattern, be sure to aim the mic at your mouth.”

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Before pressing record, be sure to remind guests to stay on after the interview because some guests will literally disconnect immediately after you thank them on the air for being on the show.

The main reason is to allow a bit of time for their Squadcast/Zencastr recording to finish uploading. If you’re not using one of these types of services that records each participant locally while progressively uploading their local recording in the background, then it really doesn’t matter if they disconnect immediately.

In addition to verifying that you have their recording, it’s good to briefly chat with guests after the recording is over because you can personally thank them again off-air, remind them what date the episode will publish, ask them to send you any assets that you need for the shownotes, and more.

Have you ever had someone disconnect immediately and therefor you lost the last bit of their recording?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I use RX 8’s Loudness Control module to set the final loudness of every single episode I produce.

In addition to having control over True Peak and Integrated Loudness (like in RX 7), in RX 8 you now also have control over Short Term Loudness, Tolerance, and a program loudness gate.

*IMPORTANT: Be aware that in the Loudness Control module you should click on the gear and check the box for “High-accuracy processing”. I found this because I felt it was acting funny so I started poking around and found it 😉

Have you used this module yet?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Where to buy sound absorption blankets and acoustic room treatments?

1. Years ago I purchased my 2-1/2″ Acoustic Eggcrate Foam (very inexpensive and good quality, too) from The Foam Factory.

2. PES alumni and awesome dude Ed Sullivan (of Sonic Cupcake) bought blankets and stands from Vocal Booth To Go.

3. Another legendary PES alumni (Liz Covart of Ben Franklin’s World) bought her custom-designed acoustic treatment from Audimute.

How about you – have you bought any acoustic treatment? Let us know in the comments below 😉

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

If you use any audio hardware that has physical knobs, dials and settings (mixer, channel strip, etc.) you may want to note down your regular settings and where each knob is set to, etc.

Because if somehow your knobs or settings are changed drastically (kids, spouse, or your own experimenting), you will always have your notes to refer to so you can put all your settings back where they were, instead of having to spend time doing lots of soundchecking and testing to get your sound back.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

When finalizing podcast episode audio, Dynamic Range Processing is more important than overall loudness.

Georg and Thomas from Auphonic wrote an excellent blog post explaining this thoroughly.

From their article:

If listeners find themselves using the volume up and down buttons a lot, level differences within your podcast or audio file are too big.
In this article, we are discussing why audio dynamic range processing (or leveling) is more important than loudness normalization, why it depends on factors like the listening environment and the individual character of the content, and why the loudness range descriptor (LRA) is only reliable for speech programs.

Were you aware of Dynamic Range Processing? If so, where do your final episodes end up in terms of Loudness Range (LRA)?

I use sufficient compression when mixing episodes so that the LRA ends up in a range that I like, meaning I don’t rely on any automated mastering processing (like Auphonic) to compress the audio into the desired range. *Though there’s nothing wrong with relying on Auphonic or other software to do this! 😉

My episodes usually end up in the 4.8 to 6.3 LRA loudness range, though my last few episodes came in at around 7.8 +/- (not yet sure why).

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I have created a course to help independent podcast editors and producers earn more money by getting new clients and charging them higher rates.

Course details here —> Getting New Clients at Higher Rates

PLUS, as part of the course you’ll get access to the New Client Challenge to help escort you (aka kick your butt) into massive action!

If you’re not sure how to find new clients, charge more and earn a great living as a podcast producer/editor, this course is for you!

Over the past 9 years I’ve personally had a lot of success producing podcasts for high-end clients, and I’m psyched to help other editors/producers tap into the HUGE numbers of companies that are ready to start podcasts and NEED a professional like you!

Also, can you think of an editor/producer who wants more podcasting clients? Consider sharing this post with them.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

One way of growing a podcast production business is to focus on producing/editing podcasts in a specific niche. This makes it possible to become the go-to production person in that niche, enables you to have more fun if you already love that niche, and allows you to learn lots of niche-specific knowledge that can be helpful to future clients in that niche (and this specialized knowledge allows you to raise your rates from time to time because you’re able to offer more value).

Of course this doesn’t mean that you automatically have to reject any and all potential clients who are not in that niche, because if you’re just beginning to grow your podcast production business you may have to bring on clients just to survive. But if/when you become very busy in that niche and known in that niche, it should be possible to pass on clients who don’t fit your focus.

So, what niche would you choose, if you were going to narrow your focus?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Which app do you use to tag your final episode MP3 files?

For my clients I use the very popular ID3 Editor. For my show I use Fission to create and tag my final M4A file (Yes, I publish M4A files, which btw Libsyn automatically re-encodes to MP3 for distribution to the few platforms that don’t accept M4A files).

Which app do you use? Some folks use other apps like Auphonic, Hindenburg, and more — AND SOME FOLKS don’t believe it’s necessary to tag MP3 files AT ALL (!).

Do you believe in NOT tagging MP3 files? Please share your opinion in the comments below.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Removing umms and ahhs. That’s it.

In a recent livestream featuring Bryan Entzminger I learned about lots of different functionality within Descript, but when I asked Bryan and Steve Stewart exactly what they were using Descript for, they both said that removing umms and ahhs is the only thing they do there…. mostly because all other Descript functionality is either unnecessary or unreliable.

What do you do in Descript?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

This eBook is free to download and has LOTS of great information about mixing on headphones including:

• Closed-Back vs Open-Back
• Frequency Response
• Stereo Imaging
• Ear Fatigue
• Translation to Speakers
• Benefits and Limitations
• Tips, Tricks, and Techniques for Mixing on Headphones

Here’s the link to the PDF.

Comment below if this was helpful to you.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

If you use Zoom to record podcast audio then you should DEFINITELY use this new “mode” to capture the best quality audio possible.

From this New and enhanced features announcement from Zoom:

High Fidelity Audio mode: This option in Advanced Audio enhances “Original Audio” mode, allowing for disabling echo cancellation & post-processing, while raising audio codec quality to 48Khz, 96Kbps mono/192kbps stereo for professional audio transmission in music education and performance applications. Professional audio interface, microphone, and headphones required.

Have you tried this yet? Does it sound better?

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Zencastr Video Beta has launched! Check out the details here.

Zencastr is one of the few remote recording apps that are Top Quality for recording remote podcast guests. I’ve been using it for many years and now I’m psyched to try it their video recording capabilities!

Have you recorded any video sessions with it yet? Do tell in the comments.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

I’ve been using RX for many years and it’s invaluable for fixing bad podcast audio. In RX 8 they’ve added Spectral Recovery which recovers and restores band-limited spoken audio, as in bad sounding audio from Zoom, Skype, etc.

RX has long been the go-to audio repair and polishing suite for film, television, music, podcasts, video games, sample libraries, and more. With RX 8, they’ve created new tools and improved beloved modules to help you accomplish more in less time than ever.

What’s new in RX 8: (video here)

Spectral Recovery to restore discarded frequencies in speech from compressed file formats, live-streams or remote calls. The all-new Wow & Flutter module to fix pitch aberrations in music recordings. Guitar De-noise to control squeaks, buzz and pick sounds from guitar recordings.
An even more powerful Music Rebalance for stem separation and mix tweaking.

I’m going to upgrade to RX 8 because I love their software and I use it everyday, and especially for the Spectral Recovery module!

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

Recently I struggled through an episode of an extremely popular podcast, which I shall not name, and this was BY FAR the worst podcast listening experience I’ve ever had. Ever. By far. (btw, the show is no longer publishing episodes)

The host, who is famous, is someone whose expertise I really appreciate and I find value in almost every single piece of content he puts out.

I’m posting my evaluation below for the purpose of helping all podcasters produce good audio.

NOTE: The episode switches back and forth between the “announcer guy” and the host (famous person).

Here are my observations and professional opinions: (feel free to comment below)

1. The announcer guy’s voice was WAY louder than the hosts voice. This is a major issue which causes listeners to “ride the volume knob” in order to be able to hear everything. But after a while listeners get tired of having to do all that work and they just turn it off.
2. The hosts parts were recorded in a reverby conference room and the audio quality was OK/barely passable.
3. There were LOTS of loud distracting thuds and table noises. Nasty and jolting.
4. Some participants in the room were asking the host questions but they sounded like they were 50 feet away; you could barely hear them, if at all. Sometimes the host would answer one of their questions with a one word answer, but since you couldn’t hear the question his answer made no sense. This was very annoying.
5. The announcer guy had ZERO energy and didn’t sound like he cared; his recording was full of loud distorted plosives;” and he had that “lazy millennial voice vocal fry.”
6. At one point the announcer guy abruptly broke in while the host was speaking with a VERY loud “Psssssst…,” which literally scared the bejesus out of me! The reason he broke in was to ask listeners to send in takeaways from this episode so the host could use them as content on his social media. This is a great example of a show/host doing something that is good for themselves in the name of “engagement” but in the process annoys 95% of the listeners. Annoying on two levels – interrupting the episode as well as milking the audience for more content for the host to use.
7. At another time the announcer guy asked the audience, “What is your favorite podcast platform?” and, “What platform are you listening on right now?” Again, I think this annoyed me because they are blatantly just doing market research on the air when they should be just doing a show. And before asking this, the announcer guy literally said that he could ALREADY get this info by looking at the shows analytics but nevertheless he wanted to hear from you – implying that, “We are too lazy to look up the answer so we need you, the listeners, to do our work for us.”
8. Over the course of this 27 minute episode the announcer guy mentioned three times that he’s been working with the host for 5-6 years. OK, we get it, and no one cares.

I mean no disrespect with this critique. I’m simply making professional observations which could potentially help many people’s podcasts sound better and be much more enjoyable for the listeners.

In a perfect world I would like to post a link to the episode for you to hear for yourself, but I don’t want to get into any drama with anyone at that show. And I would LOVE to be able to approach them and offer to help them avoid and solve all their audio issues, but we all know, “No good deed goes unpunished.”

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

If you’re hearing any electrical hum in your audio you may want to check out this ground loop hum eliminator: Ebtech Hum X Ground Line Voltage Filter

I haven’t used this product but it has excellent reviews from many industry professionals.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.

The vast majority of podcast episodes, once published, will be available to the public for many, many years into the future.

Therefor, when a podcast editor, producer or engineer is careful enough and professional enough to produce very good sounding audio, he or she can sleep well at night knowing that Every Single Listener who hears that audio in the years to come is guaranteed to have an excellent listening experience and be able to enjoy the content without being distracted or annoyed by bad audio quality.

I believe audio production is important and influential.

Want to receive the Daily Goody in your email, daily or weekly? Subscribe free here.

And please keep in mind, the Daily Goody is only a tiny little tip, fact or lesson everyday. Please don’t expect any of these posts to be long, earth-shattering masterpieces that instantly answer every single question you can think of and completely transform you into a world class podcast engineer. “Little by little, a little becomes a lot.”

.